Units

HealthKit uses strongly-typed units to ensure health data is interpreted correctly. Units in React Native HealthKit are represented as strings and follow Apple’s HKUnit conventions.

Unit types

HealthKit supports a wide variety of unit types for different measurements:

Length units

type LengthUnit = 
  | 'm'   // meters
  | 'cm'  // centimeters  
  | 'mm'  // millimeters
  | 'km'  // kilometers
  | 'ft'  // feet
  | 'in'  // inches
  | 'yd'  // yards
  | 'mi'; // miles

Mass units

type MassUnit = 
  | 'g'   // grams
  | 'kg'  // kilograms
  | 'mg'  // milligrams
  | 'oz'  // ounces
  | 'lb'  // pounds
  | 'st'; // stones

Energy units

type EnergyUnit = 
  | 'J'    // joules
  | 'kJ'   // kilojoules
  | 'cal'  // calories (small)
  | 'kcal' // kilocalories
  | 'Cal'; // Calories (large, same as kcal)

Volume units

type VolumeUnit = 
  | 'l'        // liters
  | 'ml'       // milliliters
  | 'fl_oz_us' // US fluid ounces
  | 'fl_oz_imp'// Imperial fluid ounces
  | 'pt_us'    // US pints
  | 'pt_imp'   // Imperial pints
  | 'cup_us'   // US cups
  | 'cup_imp'; // Imperial cups

Pressure units

type PressureUnit = 
  | 'Pa'     // pascals
  | 'kPa'    // kilopascals
  | 'mmHg'   // millimeters of mercury
  | 'inHg'   // inches of mercury
  | 'cmAq'   // centimeters of water
  | 'atm'    // atmospheres
  | 'dBASPL'; // decibels SPL

Time units

type TimeUnit = 
  | 's'   // seconds
  | 'min' // minutes
  | 'hr'  // hours
  | 'd'   // days
  | 'ms'; // milliseconds

Temperature units

type TemperatureUnit = 
  | 'degC' // Celsius
  | 'degF' // Fahrenheit
  | 'K';   // Kelvin

Other common units

// Percentages
'%'

// Counts
'count'

// Count per time (e.g., heart rate)
'count/min'

// Speed (any length/time combination)
'km/hr'
'mi/hr'
'm/s'

// International Units (for vitamins, medications)
'IU'

// Blood glucose
'mg/dL'
'mmol<180.15588000005408>/l'

// Audio levels
'dBHL'  // Decibels hearing level
'dBASPL' // Decibels SPL

// Apple-specific
'appleEffortScore'

Metric prefixes

You can apply SI prefixes to base units:

type MetricPrefix = 
  | ''   // no prefix (base unit)
  | 'p'  // pico  (10^-12)
  | 'n'  // nano  (10^-9)
  | 'mc' // micro (10^-6)
  | 'm'  // milli (10^-3)
  | 'c'  // centi (10^-2)
  | 'd'  // deci  (10^-1)
  | 'da' // deka  (10^1)
  | 'h'  // hecto (10^2)
  | 'k'  // kilo  (10^3)
  | 'M'  // mega  (10^6)
  | 'G'  // giga  (10^9)
  | 'T'  // tera  (10^12)
  | 'f'; // femto (10^-15)

// Examples:
'kg'  // kilograms
'cm'  // centimeters
'ml'  // milliliters
'kPa' // kilopascals

Preferred units

HealthKit automatically determines the user’s preferred unit for each quantity type based on their locale and Health app settings.

Getting preferred units

Always use the user’s preferred unit when displaying data:

import { getPreferredUnits } from '@kingstinct/react-native-healthkit';

const units = await getPreferredUnits([
  'HKQuantityTypeIdentifierHeight',
  'HKQuantityTypeIdentifierBodyMass',
  'HKQuantityTypeIdentifierStepCount'
]);

// Returns:
// [
//   { typeIdentifier: 'HKQuantityTypeIdentifierHeight', unit: 'cm' },
//   { typeIdentifier: 'HKQuantityTypeIdentifierBodyMass', unit: 'kg' },
//   { typeIdentifier: 'HKQuantityTypeIdentifierStepCount', unit: 'count' }
// ]

For a single type:

import { getPreferredUnit } from '@kingstinct/react-native-healthkit';

const unit = await getPreferredUnit('HKQuantityTypeIdentifierHeight');
console.log(unit); // 'cm' or 'ft' depending on user's locale

Querying with preferred units

When querying quantity samples, HealthKit returns data in the user’s preferred unit by default:

import { queryQuantitySamples } from '@kingstinct/react-native-healthkit';

const samples = await queryQuantitySamples('HKQuantityTypeIdentifierHeight');

console.log(samples[0].quantity); // 175
console.log(samples[0].unit);     // 'cm' (or 'ft' for US users)

Specifying a unit

You can override the preferred unit when querying:

const samples = await queryQuantitySamples('HKQuantityTypeIdentifierHeight', {
  unit: 'm' // Get results in meters regardless of preference
});

console.log(samples[0].quantity); // 1.75
console.log(samples[0].unit);     // 'm'

Saving data with units

When saving data, you must specify the unit:

import { saveQuantitySample } from '@kingstinct/react-native-healthkit';

await saveQuantitySample(
  'HKQuantityTypeIdentifierBodyMass',
  'kg',  // unit
  70.5,  // quantity
  {
    start: new Date(),
    end: new Date()
  }
);

Different units for the same type

You can save data in any compatible unit - HealthKit handles the conversion:

// Save in pounds
await saveQuantitySample(
  'HKQuantityTypeIdentifierBodyMass',
  'lb',
  155,
  { start: new Date(), end: new Date() }
);

// Save in kilograms - both work!
await saveQuantitySample(
  'HKQuantityTypeIdentifierBodyMass',
  'kg',
  70.3,
  { start: new Date(), end: new Date() }
);

// When queried, data will be in user's preferred unit
const samples = await queryQuantitySamples('HKQuantityTypeIdentifierBodyMass');
// Could be either 'kg' or 'lb' depending on user preferences

Unit compatibility

Not all units work with all quantity types. Check compatibility before saving:

import { isQuantityCompatibleWithUnit } from '@kingstinct/react-native-healthkit';

const compatible = isQuantityCompatibleWithUnit(
  'HKQuantityTypeIdentifierBodyMass',
  'kg'
);
console.log(compatible); // true

const invalid = isQuantityCompatibleWithUnit(
  'HKQuantityTypeIdentifierBodyMass',
  'mi' // miles - not compatible with mass!
);
console.log(invalid); // false

Compound units

Some quantity types use compound units:

Speed (length per time)

// Running speed
await saveQuantitySample(
  'HKQuantityTypeIdentifierRunningSpeed',
  'km/hr',  // kilometers per hour
  10.5,
  { start: new Date(), end: new Date() }
);

// Or in different units
await saveQuantitySample(
  'HKQuantityTypeIdentifierRunningSpeed',
  'mi/hr',  // miles per hour
  6.5,
  { start: new Date(), end: new Date() }
);

Count per time

// Heart rate
await saveQuantitySample(
  'HKQuantityTypeIdentifierHeartRate',
  'count/min',  // beats per minute
  72,
  { start: new Date(), end: new Date() }
);

// Respiratory rate
await saveQuantitySample(
  'HKQuantityTypeIdentifierRespiratoryRate',
  'count/min',  // breaths per minute  
  16,
  { start: new Date(), end: new Date() }
);

Molar concentrations

Blood glucose can use molar units:

// mg/dL (common in US)
await saveQuantitySample(
  'HKQuantityTypeIdentifierBloodGlucose',
  'mg/dL',
  100,
  { start: new Date(), end: new Date() }
);

// mmol/L (common elsewhere)
await saveQuantitySample(
  'HKQuantityTypeIdentifierBloodGlucose',
  'mmol<180.15588000005408>/l',
  5.5,
  { start: new Date(), end: new Date() }
);

Unit conversion

HealthKit automatically handles unit conversions. When you query data, you can specify any compatible unit and HealthKit will convert the values:

// Save in kilometers
await saveQuantitySample(
  'HKQuantityTypeIdentifierDistanceWalkingRunning',
  'km',
  5,
  { start: new Date(), end: new Date() }
);

// Query in miles - HealthKit converts automatically
const samples = await queryQuantitySamples(
  'HKQuantityTypeIdentifierDistanceWalkingRunning',
  { unit: 'mi' }
);

console.log(samples[0].quantity); // ~3.107
console.log(samples[0].unit);     // 'mi'

Best practices

Always use preferred units for display

// Good - respects user preference
const unit = await getPreferredUnit('HKQuantityTypeIdentifierBodyMass');
const samples = await queryQuantitySamples('HKQuantityTypeIdentifierBodyMass', { unit });
console.log(`${samples[0].quantity} ${samples[0].unit}`);

// Bad - assumes kilograms
const samples = await queryQuantitySamples('HKQuantityTypeIdentifierBodyMass', { unit: 'kg' });
console.log(`${samples[0].quantity} kg`); // Wrong for US users!

Validate units before saving

const unit = 'kg';
const isValid = isQuantityCompatibleWithUnit(
  'HKQuantityTypeIdentifierBodyMass',
  unit
);

if (isValid) {
  await saveQuantitySample(
    'HKQuantityTypeIdentifierBodyMass',
    unit,
    70,
    { start: new Date(), end: new Date() }
  );
} else {
  console.error('Invalid unit for this quantity type');
}

Cache preferred units

Preferred units rarely change, so cache them to avoid repeated queries:

let cachedUnits: Record<string, string> = {};

async function getUnit(identifier: QuantityTypeIdentifier) {
  if (!cachedUnits[identifier]) {
    cachedUnits[identifier] = await getPreferredUnit(identifier);
  }
  return cachedUnits[identifier];
}

Don’t hardcode units in UI

// Bad
<Text>{weight} kg</Text>

// Good  
<Text>{weight} {unit}</Text>

getPreferredUnits() - Get preferred units for multiple types
getPreferredUnit() - Get preferred unit for a single type
isQuantityCompatibleWithUnit() - Check unit compatibility
queryQuantitySamples() - Query with specific unit
saveQuantitySample() - Save with specific unit

Get Started

Core Concepts

Guides

Unit types

Length units

Mass units

Energy units

Volume units

Pressure units

Time units

Temperature units

Other common units

Metric prefixes

Preferred units

Getting preferred units

Querying with preferred units

Specifying a unit

Saving data with units

Different units for the same type

Unit compatibility

Compound units

Speed (length per time)

Count per time

Molar concentrations

Unit conversion

Best practices

Always use preferred units for display

Validate units before saving

Cache preferred units

Don’t hardcode units in UI

Build docs developers (and LLMs) love

Get Started

Core Concepts

Guides

Documentation Index

​Unit types

​Length units

​Mass units

​Energy units

​Volume units

​Pressure units

​Time units

​Temperature units

​Other common units

​Metric prefixes

​Preferred units

​Getting preferred units

​Querying with preferred units

​Specifying a unit

​Saving data with units

​Different units for the same type

​Unit compatibility

​Compound units

​Speed (length per time)

​Count per time

​Molar concentrations

​Unit conversion

​Best practices

​Always use preferred units for display

​Validate units before saving

​Cache preferred units

​Don’t hardcode units in UI

​Related APIs

Build docs developers (and LLMs) love

Unit types

Length units

Mass units

Energy units

Volume units

Pressure units

Time units

Temperature units

Other common units

Metric prefixes

Preferred units

Getting preferred units

Querying with preferred units

Specifying a unit

Saving data with units

Different units for the same type

Unit compatibility

Compound units

Speed (length per time)

Count per time

Molar concentrations

Unit conversion

Best practices

Always use preferred units for display

Validate units before saving

Cache preferred units

Don’t hardcode units in UI

Related APIs