Clawd Mochi hosts its own WiFi access point directly from the ESP32. No router, no home network, and no internet connection are needed.Documentation Index
Fetch the complete documentation index at: https://mintlify.com/yousifamanuel/clawd-mochi/llms.txt
Use this file to discover all available pages before exploring further.
Clawd Mochi creates its own WiFi access point — you don’t need an internet connection or home network.
Connect to the web controller
Power via USB-C
Plug a USB-C cable into the ESP32 and connect it to any USB charger or power bank. The display will turn on and show the boot splash.
Wait for the boot animation
After the splash screen, a logo reveal animation plays. This takes about 3 seconds. Once it finishes, the display shows the WiFi connection info.
WiFi details
| Setting | Value |
|---|---|
| SSID | ClaWD-Mochi |
| Password | clawd1234 |
| IP address | 192.168.4.1 |
| Port | 80 (HTTP) |