Wi-Fi streaming lets you play PCVR games without any cable between your Mac and headset. MoltenVR requires no extra dependencies for wireless mode — there is no ADB or additional tooling to install. As long as your Mac and headset are on the same local network, you can stream wirelessly.Documentation Index
Fetch the complete documentation index at: https://mintlify.com/112cxyz/MoltenVR-Preview/llms.txt
Use this file to discover all available pages before exploring further.
Network setup
Connect your Mac to a 5 GHz or 6 GHz network
On your Mac, open System Settings → Wi-Fi and join a 5 GHz or 6 GHz network (Wi-Fi 5 / Wi-Fi 6 / Wi-Fi 6E). If your router broadcasts separate SSIDs for each band, pick the 5 GHz or 6 GHz one explicitly.
Connect your headset to the same network
Inside the headset, go to Settings → Wi-Fi and join the exact same network as your Mac. Both devices must be on the same local network.
Wi-Fi vs. USB
| Wi-Fi | USB | |
|---|---|---|
| Setup | No extra tools needed | Requires android-platform-tools + Developer Mode |
| Latency | Slightly higher | Lowest possible |
| Bandwidth | Varies with environment | Consistent 100 Mbps |
| Freedom of movement | Cable-free | Limited by cable length |